Schedule a FREE complete system evaluation | Call us: 727-621-0335
This commercial pool had turned slightly green after a problem with the chlorination system. Once the chlorine issue was corrected and the pool was treated, the green disappeared — but the water remained extremely cloudy.
At that point, simply adding more chemicals wasn't going to solve the underlying problem.
The pool was blue, but the filtration system wasn't doing its job. After troubleshooting the system, we found a clog restricting filtration. Until that restriction was corrected, the suspended material in the water had nowhere to go.
It's a good example of something we see often in pool care: water chemistry and equipment have to work together. Clear water doesn't come from chemicals alone.

When algae is killed or fine debris is suspended in the water, the pool may lose its green color long before it becomes clear. That material still has to be physically removed from the water.
That's where circulation and filtration become critical.
If water isn't moving properly through the filtration system — because of a clog, dirty filter, circulation problem or another restriction — the pool can remain cloudy no matter how many chemicals are added.
In this case, the persistent cloudiness was the clue that made us look beyond the water chemistry and into the filtration system.

After the chlorination problem was corrected, the pool responded—the green was gone—but the expected improvement in clarity wasn't happening.
Rather than continuing to add treatment after treatment, we turned our attention to the filtration system. Troubleshooting revealed a clog that was restricting filtration and preventing the system from properly clearing the water.
Once you know the cause, you can fix the actual problem instead of continuing to treat the symptom.

A clogged, dirty or malfunctioning filtration system may not remove fine suspended material from the water.
Low flow, plumbing restrictions or equipment problems can prevent enough water from reaching the filter.
After algae is killed, microscopic material can remain suspended until the filtration system removes it.
Improper sanitizer levels, pH or other chemistry problems can contribute to cloudy water and make recovery more difficult.
Damaged cartridges, grids or other internal filter components can allow material to remain in or return to the pool.
When a pool stays cloudy despite treatment, adding more chemicals isn't always the answer. Sometimes the problem is circulation, filtration or equipment that isn't working the way it should.
Cartridge Family Pools provides pool water troubleshooting, equipment diagnostics and repair throughout Tampa Bay. As a Florida Licensed Pool Contractor (CPC1461408), we can look beyond the water chemistry when something isn't adding up and troubleshoot the system as a whole.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.